18G HDMI & Control Extender Set over Twisted Pair Cable — 40m ( TL-TP40-HDC2 ) – Techlogix

$173.91 +GST

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

2 in stock

SKU: TL-TP40-HDC2 Category: Brand:

Description

18G HDMI & Control over Twisted Pair Cable Extender Set — 40m

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP40-HDC2 replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 130 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.

In actual practice, this means you can use the TL-TP40-HDC2 to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely…all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

Technical Features

  • Transmit HDMI, RS232 & IR over a single twisted pair cable
  • 18G 4K@60 4:4:4 compatible
  • 130 ft. (40m) max distance for 4K
  • 220 ft. (70m) max distance for 1080p
  • Embedded bi-directional IR and RS232 control
  • System powered from either the transmitter or receiver
  • HDMI 2.0 and HDCP 2.2 compliant
  • CEC & HDR compatible
  • Light compression (2:1 ratio) on signals over 10G

Installation

  1. Run a twisted pair patch cord with RJ45 connectors between your source device and destination device.
  2. Connect the TL-TP40-HDC2 transmitter (included in the package) to your source device with an HDMI cable.
  3. Connect the TL-TP40-HDC2 receiver (included in the package) to your destination device with an HDMI cable.
  4. Optionally connect the IR or RS232 control ports if your system requires control.
  5. Connect the twisted pair patch cord with RJ45 connectors to the twisted pair input ports on the TL-TP40-HDC2 transmitter and receiver.
  6. Connect the power supply (included in the package) to the DC 12V port on either the TL-TP40-HDC2 transmitter or receiver.
  7. Connect the power supply (included in the package) to an AC outlet or power source.

Additional information

Shipping weight 0.6 kg

Download

Click here to download Technical Specification

Click here to download Product Manual