Brands
Showing 221–240 of 241 results
-
IP2IR iTach Wired TCP/IP to IR (IP2IR) – Global Cache
$304.16 +GSTiTach Wired TCP/IP to IR
The iTach TCP/IP (Ethernet) devices provide a new level of automation and control flexibility, enabling device networking in homes, businesses, or schools.
-
IP2IR-P iTach TCP/IP to IR With POE (IP2IR-P) – Global Cache
$391.65 +GSTiTach Wired TCP/IP to IR with POE
The iTach TCP/IP (Ethernet) devices provide a new level of automation and control flexibility, enabling device networking in homes, businesses, or schools.
-
WF2IR iTach WiFi to IR (WF2IR) – Global Cache
$366.65 +GSTiTach Wired TCP/WiFi to IR
Wirelessly connect, monitor, and control infrared devices over a network and the Internet. The iTach WiFi devices provide a new level of automation and control flexibility, enabling device networking without wiring.
-
IP2SL iTach TCP/IP to Serial (RS232) (IP2SL) – Global Cache
$304.16 +GSTiTach Wired TCP/IP to Serial
Seamlessly connect, monitor, and control Serial devices over a network and the Internet. The iTach TCP/IP (Ethernet) devices provide a new level of automation and control flexibility, enabling device networking in homes, businesses, or schools.
-
IP2SL-P Global Cache
$391.65 +GSTThe iTach IP2SL provides wired TCP/IP connectivity to serial devices
Power Input – 12V DC @ 500mA (Wall power adaptor included) – Network connection – RJ45 10/100Mbps – Serial Port – Male DB9, RS232 from 1200 baud to 57.6 Kbaud – Flow control – Bi Directional with hardware RTS/CTS and parity -
RJ45 Connector and Strain Relief (100pcs) – Kordz
$32.00 – $113.33 +GSTRJ45 CAT6 PUSH-THROUGH SITE TERMINATION CONNECTORS & STRAIN RELIEFS
-
Crimping tool for ONE series push through RJ45 field termination – Kordz
$184.73 +GSTA high-end crimping tool designed to crimp or connect a connector to the end of Cat6 cable.
-
ONE field terminated RJ45 Connector tool-less plug/male (P1R45M-C6AS) – Kordz
$19.70 +GSTONE field terminated RJ45 tool-less plug (male), category 6A, shielded, black.
The Kordz Category 6a Shielded Field Termination RJ45 Connector offers easy, toolless termination and complies fully with ISO/IEC 11801 2.2 Edition Category 6a and ANSI/TIA-568-C.2 Category 6A standards for applications up to 10GBase-T Ethernet and frequencies up to 500Mhz.
-
4K AI Motorized Mini Dome Network Camera (MS-C8175-F(I)PC) – Milesight
High accuracy and real-time people counting based on AI algorithm, with statistic reports for further analysis, helps to make fast decisions on security management and increase the operational efficiency of the business.
*ETA for products not currently in stock will take up to 2- 3 weeks for delivery.
-
Target Junction Box and Plasma/LCD Target with Discrete Selection (RL-IR505) – resi-linx
$222.88 +GSTOnly Foxtel Approved Receiver Module for use in resi-linx® NEW ‘linx-IR’ patented Discrete Infra Red system. Advantage of Discrete IR control of specific AV devices from each zone via Dip Switch selection. Easily extendable cable distance by ‘Plug and Play’ facility using RJ45. Built-in LED’s to show acknowledgement of IR commands and Power status. Powered remotely by RL-IR305. Works with IQ3
-
Double IR Emitter (RL-IR800) – resi-linx
$41.96 +GSTThe resi-linx ® RL-IR800 is a “Foxtel Approved” double head blaster-type IR emitter that repeats IR remote control signals received at an IR target and sent back through the cable to the AV equipment. Compatible with RF IR pass back systems (5V) and Hard Wired IR systems (12V)
-
IR Repeater Kit (ARC-1204A) – Arco
$98.00 +GSTIR REPEATER KIT
Arco ARC-1204A takes Infrared (IR) light coming from your remote controller and converts it to an electrical signal that can be easily distributed over electrical wiring to one or more IR remote controllable components.
-
Mini IR Receiver Dual Band Surface Mount (ARC-1178A) – Arco
$50.69 +GSTIR Target:
ARC-1178A sends information from an infrared remote control to another device by receiving and decoding signals.
-
Brush Wall Plate (BWPW)
$10.87 +GSTThis single gang blank wall plate allows cables to enter the wall cavity space without the need to inter-connect wall plates in between.
-
Lutron CW-1-WH US style 1 Gang Screwless Wallplate
$16.40 +GSTThe Lutron screwless wall plate mounts flush against the wall and provide a clean, streamlined appearance. Unlike conventional wall plates with visible screws, the Lutron Claro 1-gang wall plate features a two-part configuration – a backing plate that attaches to the wall and a vanity plate that easily snaps to the backing plate, covering the screws. The oversized wall plate hides gaps around wall boxes and works with most large toggle light switches and dimmers.
-
Speaker to line-level adapter (ADP-1.2) – Russound
$87.57 +GSTSpeaker to line-level adapter
Recommended for use with CAA66 and MCA-66 to obtain line level outputs for zones without pre-amp outputs. Color-coded detachable 14-gauge snap connectors. Not for use with digital amplifiers.
-
6.5″ Round/Square Grilles for In-ceiling speaker (RSG-6R, RSG-6S) – Russound
$31.00 – $38.11 +GST6.5″ Acclaim Magnetic Edgeless Grille. Designer-inspired edgeless magnetic grilles conceal loudspeaker elements yet allow high fi delity sound through. The grille can be painted to match décor.
-
8″ Round/Square Grille (RSG-8R, RSG-8S) – Russound
$40.54 – $47.50 +GST8″ Acclaim Magnetic Edgeless Grille. Designer-inspired edgeless magnetic grilles conceal loudspeaker elements yet allow high fi delity sound through. The grille can be painted to match décor.
